What are the Cortex-M core registers?
Short answer: Cortex-M has 16 core registers: R0–R12 general purpose, R13 the stack pointer (banked as MSP and PSP), R14 the link register, R15 the program counter, plus the program status register xPSR and the special registers PRIMASK, FAULTMASK, BASEPRI (interrupt masking) and CONTROL (privilege and stack selection). Cores with an FPU add S0–S31 and FPSCR.
| Register | Role |
|---|---|
| R0–R3 | arguments and return values (AAPCS), scratch |
| R4–R11 | callee-saved variables |
| R12 | scratch (IP, intra-procedure call) |
| R13 (SP) | stack pointer: MSP (main) or PSP (process), selected by mode and CONTROL.SPSEL |
| R14 (LR) | return address after BL; inside an exception holds an EXC_RETURN value (e.g. 0xFFFFFFF9) |
| R15 (PC) | program counter |
| xPSR | combined APSR (N, Z, C, V, Q flags, GE bits), IPSR (current exception number), EPSR (Thumb bit, IT/ICI state) |
| PRIMASK | 1 = mask all configurable-priority interrupts |
| FAULTMASK | 1 = also mask HardFault (not on v6-M) |
| BASEPRI | mask interrupts at or below a priority (not on v6-M) |
| CONTROL | bit 0 nPRIV (unprivileged thread mode), bit 1 SPSEL (use PSP in thread mode), bit 2 FPCA (FP context active) |
| MSPLIM, PSPLIM | stack limits (Armv8-M) |
Reading special registers from C (CMSIS): __get_IPSR(), __get_CONTROL(), __set_BASEPRI(), __get_MSP(), __get_PSP().
Why these matter in interviews
- The IPSR tells you whether code is running in an ISR (non-zero) and which one; RTOS code uses this to choose between normal and
FromISRAPIs. - EXC_RETURN in LR tells a fault handler which stack held the faulting context (bit 2: 0 = MSP, 1 = PSP).
- The Thumb bit (EPSR.T) must always be 1 on Cortex-M; branching to an address with bit 0 clear causes a UsageFault (INVSTATE), a classic bug with hand-built function pointers.