Microsoft Embedded Interview Guide
- Roles
- Firmware Engineer, Embedded Firmware Engineer, Senior Firmware Engineer
- Hiring hubs
- Redmond, Hyderabad, Bengaluru, Noida, Taipei
- Focus
- C, RTOS, HAL/BSP, BIOS/UEFI, boot, debugging
Processes differ by team, level and country, so treat this as a typical picture, not a guarantee. Last updated: November 2026.
At a glance
| Typical process | Recruiter or referral → phone/video screen → 3–5 technical rounds mixing coding and embedded questions |
| Main focus | C, RTOS, HAL and BSP design, BIOS/UEFI, Linux boot, debugging, data structures |
| Coding style | Data-structure problems (palindromes and similar), sometimes completing half-written code |
| Reported difficulty | Often described as difficult, but many candidates still report a positive experience |
How the process usually runs
One candidate who accepted an offer described four rounds: a phone or video screen, then three technical rounds of coding and embedded-systems questions. Others describe a deep dive into C, RTOS and debugging skills, including walking the team through how they solved a tricky memory leak. Campus candidates for hardware teams sometimes got circuit-design questions instead of pure firmware ones, depending on the team (Xbox, Surface and others).
Topics that come up most
- C:
volatileandstatic→ C Programming, Embedded C - Firmware structure: HAL, BSP → Embedded C, Driver coding
- Boot: how a Linux system boots; BIOS questions → Embedded Linux & Boot
- RTOS and debugging: memory leaks, debugging approach → RTOS, Debugging & Tools
- Data structures and coding → Data Structures, Arrays & Strings
Questions candidates reported (paraphrased)
- Explain
volatileandstatic. - Walk through how a Linux system boots.
- BIOS questions plus data structures.
- Describe a memory leak you tracked down and how you found it.
- A palindrome problem; completing partially written code.
Practice questions
These are the questions Microsoft candidates most often report, or close variants of them. Each links to a full answer or a coding problem with tests on this site.
- What are a HAL and a BSP, and how do they differ?
- What is the volatile keyword?
- What does the static keyword do in different contexts?
- Walk through the complete boot process of an embedded Linux system, from power-on to the login prompt.
- What happens inside U-Boot from reset until it boots the kernel?
- What is secure boot and a chain of trust?
- What is an RTOS and how is it different from a general-purpose OS?
- What is the difference between a breakpoint and a watchpoint?
- What are ITM, SWO, ETM and RTT, and when do you use trace?
- Check whether a linked list is a palindrome.
- Find the longest palindromic substring.
- HardFault Handler that Captures the Stack Frame (coding)
- Fixed-Block Memory Pool (coding)
How to prepare
- Have one or two detailed debugging stories ready, with the tools you used and what you measured.
- Revise the boot chain end to end: ROM, bootloader or UEFI, kernel, init.
- Practise standard coding questions in C, since rounds often mix coding and embedded topics.
- Be ready to explain how you structured a HAL or BSP on a past project.
Share your experience on the forum and help the next candidate.
Sources: summarised from candidates' public interview reports on Glassdoor [1] [2] [3] [4] [5]