</>EmbeddedInterview

AMD Embedded Interview Guide

Roles
Firmware Engineer, Embedded Software Engineer, Firmware Intern
Hiring hubs
Austin, Santa Clara, Markham, Hyderabad, Bengaluru
Focus
Embedded C, bit manipulation, pointers, interrupts, Linux drivers

Processes differ by team, level and country, so treat this as a typical picture, not a guarantee. Last updated: November 2026.

At a glance

Typical process Hiring manager round → 2–3 technical rounds, often split between questions and live coding
Main focus Embedded C, bit manipulation, pointers and memory, interrupts, structure padding, Linux kernel drivers for some teams
Coding style Live coding (CoderPad mentioned), "what does this code print / what is wrong with it" snippets
Reported difficulty Varies by team: many describe easy-to-average questions, while some firmware roles were rated difficult

How the process usually runs

Several candidates describe a hiring-manager round focused on resume and projects, followed by two or three technical rounds. One candidate's interviews were an hour each, split evenly between technical questions and live coding. Intern interviews were sometimes a single hour: 15 minutes on projects and three short coding questions. Some firmware roles close to hardware also asked Verilog questions.

Topics that come up most

Questions candidates reported (paraphrased)

  • Count the set bits in a number.
  • Structure padding, volatile and interrupt questions.
  • What is wrong with this C snippet, and what does it print?
  • What is the heap used for?
  • Difference between RISC and CISC.
  • Parallel processing and semaphores (for a GPU-adjacent firmware role).

Practice questions

These are the questions AMD candidates most often report, or close variants of them. Each links to a full answer or a coding problem with tests on this site.

  1. How do you count the set bits in an integer?
  2. How do you extract or insert a bit field?
  3. What is endianness and how do you check it in code?
  4. How do you swap the endianness of a 32-bit value?
  5. What is structure padding and how do you avoid it?
  6. What is volatile and when must you use it?
  7. What is an ISR and what are the rules for writing one?
  8. What is the memory layout of a C program?
  9. What is RISC, how does it differ from CISC, and why did Arm succeed?
  10. What is the difference between an array and a linked list?
  11. How do you write an I2C (or SPI) client driver?
  12. Set, Clear, Toggle and Test a Bit (coding)
  13. Count the Set Bits (coding)
  14. Extract and Insert a Register Field (coding)
  15. Swap Byte Order of a 32-bit Value (coding)

How to prepare

  1. Drill bit manipulation until it is automatic: Set, Clear, Toggle, Register Field, Swap Byte Order, Count Set Bits.
  2. Practise reading C snippets for undefined behaviour, padding and pointer mistakes.
  3. For driver teams, revise kernel module structure, interrupts and locking.
Interviewed at AMD?

Share your experience on the forum and help the next candidate.

Share your experience

Sources: summarised from candidates' public interview reports on Glassdoor [1] [2] [3] [4] [5]